Stachybotrys requires a different level of response than common surface molds. Every service below reflects that.
🔍
Black Mold Identification & Assessment
Confirmed black mold removal starts with identification. Our Vancouver, WA technicians collect surface swab samples from suspected areas and can have lab results confirming species within 24–48 hours. We don't assume Stachybotrys based on color — we confirm it, because the remediation protocol is different from standard mold removal and misidentification wastes your money.
😷
Full PPE & Containment Setup
Before any Stachybotrys removal begins in a Vancouver property, our crew establishes Type III containment: double-layer polyethylene barriers floor-to-ceiling, HEPA negative air machines creating inward airflow, and a decontamination station at containment entry. Full Tyvek coveralls and N100 respirators worn by every technician in the work zone.
🔨
Complete Stachybotrys Material Removal
Stachybotrys on drywall, ceiling tiles, or subflooring means those materials must be removed — not treated in place. The mycotoxin-containing material itself is the hazard, and surface biocides don't render it safe or remove it from your Vancouver property. We remove contaminated materials, bag them in heavy-duty poly, and dispose of them through proper waste channels.
💧
Structural Surface Treatment & Encapsulation
After contaminated materials are removed, exposed structural framing is HEPA-vacuumed, treated with EPA-registered fungicide, and where appropriate, sealed with mold-resistant encapsulant. This dual approach — chemical treatment plus physical barrier — is the standard for Stachybotrys-affected structural materials in Vancouver, WA.
📋
Independent Post-Removal Air Testing
Independent IH clearance sampling after every Black Mold Removal job. Written lab report confirming post-removal air quality — not just our assessment that the work is done.
🏗
Moisture Source Identification & Correction
Stachybotrys only grows on consistently wet cellulosic material. Its presence means there's been a sustained moisture source — typically a leaking pipe, roof infiltration, or chronic condensation issue. We identify and document the moisture source on every Vancouver, WA black mold job and provide specific corrective recommendations, because removal without source correction means regrowth.
